DIY

How To Change A Faucet

How to Change a faucet

Knowing how to change a faucet becomes imperative if you have been experiencing unceasing leaks and corrosion. Not only is a leaky faucet utterly annoying, but it could lead to massive waste of water resources. In times of climate change and water crisis, every drop of water becomes essential. It is also never a good idea to ignore a leaking faucet. Fundamentally, the longer you wait, the bigger damages you will need to mend in the future.
A faucet that continuously drips one time every second is tantamount to five gallons of water being wasted. Imagine how many gallons of water literally and figuratively goes down the drain every month and every year. Then, you can calculate how much money you are wasting as well. Whether you changing your faucets for repair or bathroom beautification, knowing how to change a faucet can help you save a lot of money. It is likewise an opportunity to learn a new skill.

Tips to Know Before Changing

How to change a faucet can be made easier if you know a hack or two. Firstly, you need to be acquainted on how to choose the right faucet for your bathroom. To illustrate an example, if you have a gravity-fed system for your water but installed a high-pressure faucet, chances are you will experience a poor flow of water. Such incompatibility is often overlooked by novice plumbers and homeowners.

Another tip is to make sure that you check the valve seating as well. Even with a new faucet installed, a corroded valve seating may still cause leaks. If you happen to have a grinding tool at home, then this is the best time to use it. As a general rule, the sooner you change a washer, the less likely your seating will get corroded or damaged.

Tools You Will Be Needing

If you are still in the process of learning how to change a faucet on your own, chances are you will probably be taking more than a single trip to your local hardware. To avoid this and to save your time and energy, you may use the following list and consider purchasing them all at once. It would also be helpful to change your faucet during business hours so that you can easily head to the store if you need to purchase spare items.
Basin Wrench – This tool is specifically designed to remove and install fasteners that have been used to clamp the older type of faucet assemblies. These basin wrenches typically come with jaw pivots that are spring-loaded that help loosens or tighten those hard-to-reach fasteners. Unlike the older faucet assemblies, the new types of faucets come with wing-nuts that can be disassembled using the hand.

Shut-off Valves – Many fail to check whether there are shut-off valves under the lavatory or sink. If yours have one, double check if it works well. Otherwise, adding them to your shopping list is highly recommended. If you truly want to learn how to change a faucet, investing in quality tools can be beneficial to you in the long run.

Supply Tubes – Your choice of supply tubes will depend on then shut-off valves. It is advised that you go for the stainless steel sleeved tubes so you can benefit from rupture-free service for a long time. If you choose to buy copper tubes, make sure that you also have a tubing cutter.

How to Change a faucet

Now that you have checked all the components of the faucet that need to be replaced, the next steps to know are the process of changing your old faucet and replacing it with the new one. If you do not have any clue on which type of faucet to use, you may opt for a more eco-friendly type. These Eco-click faucets are easy to install and are sustainable as well. Are you ready to know how to change a faucet? Turn off your water supply first, then read on to see the easy step-by-step guide.

  • Step 1 – Loosen the holding nuts of the fastener of your old faucets. It may be tough to reach, but using a basin wrench, this should not be a problem. Using a cranked spanner, remove the back nuts that locked the faucets to the basic itself.
  • Step 2 – When fasteners have been loosened out, you can start lifting the old faucets. If you feel that the faucet is stuck, it could be because of old putty that holds in place. If so, you can use a wooden mallet to faucet them lightly. This would help loosen the putty and eventually help you lift the old faucet. Make sure that you clean the ceramic after you have removed the faucet and before installing the new one. Cleaning the old pipe is just as important as knowing how to change a faucet.
  • Step 3 – Time to install the new faucet. Fasten the faucets from the underneath. Use the mounting nuts and the washers that come with them. Note that the faucet for the hot water is always on the left while the cold one should be installed on the right.
  • Step 4 – You can re-patch the old pipework. Another option is to use flexible faucet connectors that are 15mm in thickness. Make sure that there is no debris in the faucet before proceeding with the attachment. With the use of a wire wool, you can get rid of any dirt or tarnish on the old pipe.
  • Step 05 – Now that you have learned how to change a faucet, it is time to perform a bit of checking. Turn on your water supply and turn the faucet on. Double check if there are any leaks.
    • Learning how to change a faucet is not as complicated as many people think. Having the right tools and understanding the basics of water pressure to check the compatibility of the pipes are two of the most helpful information you can use. So, before you call a plumber to change the faucets in your home and spend a hefty amount of money for the job, you can review this basic guideline on how to change a faucet and do it yourself.