How To Fit A Bath Tub


Sure, you may not be exactly a professional plumber, but that does not mean you can never learn how to fit a bathtub well. Knowing how to fit a tub will not only help you develop a new skill, but will also allow you to save a whole of time and money. If you are keen on DIYs, this could be the perfect project for you. Learn to fit it, then install it!

Understanding the Anatomy of a Tub

One of the first things you need to get accustomed to is the different types and parts of a tub. The truth is – bath tubs greatly vary in shapes, sizes, and dimensions. One of the trickiest parts of installing a new tub to replace an old one is to ensure that the parts fit in the same old spot. Selecting a bigger tub to replace an old one also poses another challenge – room to work. If the bathroom is too small, then removing the other fixtures may sometimes be necessary.

Generally, there are four types of bathtub available in the market. The techniques on how to fit a bath tub also depend on the type. See the following for your reference:

Free-standing tubs – These are tubs that are generally disconnected from the walls or to any surface. One of the prerequisites of fitting a free-standing tub is the space. If you intend to learn how to fit a bathtub of this type, you must be sure that you have plenty of space to work on.

Corner bathtubs – These tubs typically have five sides and are usually designed to function as home spa therapy. The tub is spacious to accommodate more than one person. The downside of this tub is that it consumes to much water. As it usually comes with a specific technology, hiring a professional is a better option than doing the fitting on your own.

Alcove bathtubs – This is the most common type and it fits in a three-sided enclosure. The Alcove type is also among the easiest to install. In addition, they happen to be the cheapest. Using the Alcove-type, you can easily learn how to fit a bathtub in no time.

Drop-in bathtubs – The Drop-in type has a specific requirement for installation. To learn how to install a bathtub of this type, you will be needing another professional to build a deck where it is to be installed.

If you are highly interested in learning how to fit a bath tub, it is better to learn which type best fits your needs. For the purpose of illustration, the steps you will learn on how to fit a bathtub is based on the most common type – the Alcove or the straight tub.

What To Do Before Fitting the Tub

If you are having your tub delivered right to your doorstep, it is highly recommended that you unpack it right away. It is wise to check for any damages, which may have been caused in transit. Furthermore, see to it that all components indicated in the manual or package are complete. It is better to discover the damages or missing items outright than during the process of learning how to fit a bathtub.

Another important action to take is to ensure that your water system is turned off before the installation or before any DIY activities in the bathroom. Next step is to make sure that you have all the necessary tool. Knowing how to fit a bathtub likewise requires familiarity with these tools such as electric drill, pencil, adjustable wrench, tape measure, standard screwdrivers, hacksaw, pipe/tube cutter, level, sealant gun, and silicone sealant. Your bath tub must come with adjustable feet and handles.

Easy-to-Follow Steps in Fitting a Bathtub

Now that you have all the tools required and your bath tub ready, you simply have to follow the succeeding steps on how to fit a bath tub with ease. You cannot do this in a rush, so make sure that you have at least one full day to spare:

  • Step 1 – Place your bath on a leveled surface and take out the instruction manual that came with it. This is the best time to fix the handles. After fitting the handles, it is time to fit the waste, overflows, and the taps.
  • Step 2 – Use two wooden battens of about 60 mm wide to protect the floor. Check whether the bath is balanced or not. Adjust the feet when necessary.
  • Step 3 – Time to mark the spots. Using a pencil, mark the holes on the wall surface. These marks are specifically for brackets and fixing plates.
  • Step 4 – Attach the waste trap. If there are any adjustments needed for the waste pipe, take note of it. To learn how to fit a bathtub effectively, you must be keen in recording the measurements or adjustments.
  • Step 5 – Attach the tap tails and mark off where the water pipes have to be cut. Let the marking continue and this time note on the floor where the bath’s wooden supports need to be placed.
  • Step 6 – Screw the wooden supports into place after removing the bath.
  • Step 7 – Drill some pilot holes on the wall using an electric drill. The holes are for the fixing brackets. Install the rawl plugs, too.
  • Step 8 – Adjust the waste pipe and double check whether the water pipes need some adjustments, too.
  • Step 9 – Tighten up the flexible taps and tap tails. Make sure that the handle connections are secure. Peel back the protective film on the edges of the tub.
  • Step 10 – With your screwdrivers, fasten the feet right to the floor. Screw the fixing brackets to the bathroom wall. Then connect the flexible tap tails to the pipes that supply water. Make sure that these pipes are not twisted nor bent.
  • Step 11 – One of the most important parts of the process in learning how to fit a bathtub is the water testing. Turn the water supply on and check for leaks. It would be helpful if you fill the tub up with water before sealing it.
  • Step 12 – Grab a good amount of silicone sealant and seal around the edges.

Et voila! You have just fitted a bath tub. The steps involved in learning how to fit a bathtub are generally simple. As long as you have all the necessary tools and the space to work around the fitting, then you will do just fine. Lastly, in order to learn how to fit a bathtub more effectively, make sure that you are interested in DIY as a whole.